Kramer 5.25-Inch On-Wall Powered Speaker

A pair of 5.25−inch powered two−way speakers designed for indoor wall mounting. The active speaker accepts a line−level stereo input and amplifies it using a built−in amplifier and outputs a speaker signal to the passive speaker.

•  Active Loudspeaker — Stereo 2x30W RMS, 2x80W continuous program amplifier and volume control.
•  Audio Level Controls — Volume, treble and bass.
•  Magnetically Shielded.
•  Enhanced Bass Reflex.
•  Auto Power — Shuts off when system is not in use, indicated by a LED.
•  Automatic Input Voltage Selector — 90 to 240V AC, 50 to 60Hz.
•  Indoor Wall Mounting.
•  Available in Black or White.
•  Mounting Configuration — Active speaker: left, passive speaker: right.
•  Weight (Single Speaker) — Active speaker 2.7kg (5.95lbs) approx., passive speaker 1.7kg (4.85lbs) approx.
•  Package — 2 speakers (1 pair), 1 pair of U–shaped rotating mounting brackets with 4 mounting bracket screws, 3m power cord, 4m loudspeaker cable and a 2m RCA cable, user manual.

DESCRIPTION
2–way powered speaker
BUILT IN POWER AMPLIFIER
2x30W RMS, 2x80W continuous program
FREQUENCY RESPONSE
45Hz to 20kHz @–10dB, 100Hz to 20kHz @±3dB
WOOFER
5.25” polypropylene cone with rubber edge woofer
TWEETER
0.5" Mylar dome tweeter
SENSITIVITY
85dB SPL, 1W@1m
MAX SPL
Continuous: 105dB, peak: 110dB
POWER SOURCE
90–240V AC, 50/60Hz
CROSSOVER FREQUENCY
8kHz
DIRECTIVITY FACTOR (Q)
5.8 averaged 1kHz to 10kHz
DIRECTIVITY INDEX (DI)
7.6dB averaged 1kHz to 10kHz
INPUT CONNECTORS
Line level unbalanced stereo audio on a 3.5mm mini jack,
Line level balanced stereo audio on a terminal block connector,
Line level unbalanced stereo audio on left and right RCA connectors
OUTPUT CONNECTORS
Speaker (to connect to the external passive speaker),
3.5mm mini jack lineout for optional sub–woofer,
3.5mm mini jack loop output
DAMPING FACTOR
>100 @8Ω/400Hz
S/N RATIO
>83dB
THD
<0.2%
CONTROLS
Volume, bass and treble
INPUT POWER
ON or AUTO
STANDBY MODE POWER CONSUMPTION
0.7W
INPUT SIGNAL FOR SYSTEM “WAKE-UP” FROM STANDBY MODE
+8mV to +11mV
MATERIALS
Aluminum grill, steel brackets, ABS cabinet
WEIGHT PER SINGLE SPEAKER
Active speaker: 2.7kg (5.95lbs) approx
Passive Speaker: 2.2kg (4.85lbs) approx
WEIGHT WITH MOUNTING KIT
Active Speaker: 3.1kg (6.83lbs) approx
Passive Speaker:2.6kg (5.73lbs) approx
SHIPPING WEIGHT (FOR PAIR)
6kg (13.23lbs) approx
DIMENSIONS WITH MOUNTING BRACKETS
18.3cm x 17.2cm x 26.5cm (7.2” x 6.8” x 10.4”) W, D, H
INSTALLATION CLEARANCE
Front panel to wall (with mounting bracket): 22cm (8.7in)
Back panel to wall (with mounting bracket): 4.5cm (1.8in)
ACCESSORIES
1 pair of U–shaped rotating mounting brackets with 4 mounting knobs, 4m (13.1ft) power cord, 4m (13.1ft) loudspeaker cable and a 2m (6.6ft) 3.5mm to 2 RCA cable